Filter
Top Products
3
GENERAL SAFETY RULES (FOR ALL TOOLS)
SYMBOL MEANING
The purpose of safety symbols is to immediately attract your attention to the possibility of dan-
ger. The following safety symbols and the explanations of them deserve your careful attention
and complete understanding. These safety warnings do not eliminate any dangers on their
own, and the instructions and warnings they give should not be taken as substitutes for proper
accident prevention measures.
SAFETY ALERT
SYMBOL Indicates
caution or warning.
May be used in con-
junction with other
symbols or
pictures/graphs.
WARNING
Failure to heed a
safety WARNING
can result in serious
injury to yourself or
to others. Always fol-
low the safety precau-
tions to reduce the
risk of fire, electric
shock and personal
injury.
CAUTION
Failure to heed a
safety CAUTION can
result in property
damage or personal
injury to yourself or
to others. Always fol-
low the safety precau-
tions to reduce the
risk of fire, electric
shock and personal
injury.
NOTE
Advises you of infor-
mation or instructions
that are necessary in
the operation and
maintenance of the
tool.
WARNING: Do not attempt to oper-
ate this tool until you have thoroughly read
and fully understand all the Safety Rules,
Rules For Safe Operation, and Instructions
and Information specific to the safe operation
of this tool. Failure to do so can result in
accidents involving serious personal injury,
fire or electric shock. Save this manual and
review it frequently for safe operation and for
instructing others on the proper use of this
tool.
WARNING: Do not attempt to oper-
ate tool if any parts are missing. Failure to do
so could result in possible serious personal
injury. Do not use tool if trigger switch does
not turn it on or off.
WARNING:
Do not allow familiarity
with the tool to make you careless in its oper-
ation. Remember that it only takes a careless
fraction of a second to inflict severe injury.
607691-00/BT300 Sander 11/3/03 3:14 PM Page 3