Filter
Top Products
23
PUSH STICK
MAKE FROM 1/2 inch OR 3/4 inch
WOOD OR THICKNESS LESS
THAN WIDTH OF MATERIAL TO
BE CUT
CUT OFF HERE TO
PUSH 1/4 inch WOOD
CUT OFF HERE TO
PUSH 1/2 inch WOOD
NOTCH TO HELP
PREVENT HAND
FROM SLIPPING
1/2 inch SQUARES
CONSTRUCTING A PUSH STICK
When ripping work less than 4 inches wide, a push stick should be used to complete the feed and could be easily
made from scrap material by following the pattern shown in Fig. 53.
Fig. 53