Black & Decker BD200MT TYPE 2 Battery Charger User Manual


  Open as PDF
of 44
 
6
Intended Use
Detail Sanding
Sandinginextremelytightareasotherwisedifficulttoreachandrequirehandsanding.
Select a high oscillating frequency. Sand with continuous motion and light pressure.
Applyingexcessivepressuredoesnotincreasematerialremoval;butwillprematurely
wear sanding sheets.
Flush Cutting
Removeexcesswoodfromdoorjamb,windowsilland/ortoekick.Removingexcess
copper or PVC pipe.
Removal Work
Carpets & backing, old tile adhesives, caulking on masonry, wood and other surfaces.
Removal of Excess Materials
Tile grout, plaster, mortar splatters, concrete on tiles, sills.
Preparation of Surfaces
New floors and tiles.
SAVE THESE INSTRUCTIONS
Functional Description
A)On/Offswitch
B) Variable speed dial
C) Power cord
D) Clamp washer
E) Bolt
F)Hexwrench
BD200MT Only
G) Tool-free release
H) Adaptor plate
I) Press board
J) O-ring
A
B
C
BD200TMT
G
C
A
B
BD200MT
F
D
E
Assembly (BD200TMT)
WARNING: Disconnect the plug from the power source before making any
assembly, adjustments or changing accessories. Such preventive safety measures
reduce the risk of starting the tool accidentally.
WARNING: Risk of lacerations or burns. Do not touch workpiece or blade
immediately after operating the tool. They can become very hot. Handle carefully.
Always allow workpiece and accessories to cool before handling.
H
J
I
 previous next