14
MAINTENANCE
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be performed by authorized
ACCESSORIES
Recommended accessories for use with your tool are available from your local dealer or
authorized service center. If you need assistance regarding accessories, please call:
1-800-544-6986.
WARNING: The use of any accessory not recommended for use with this
tool could be hazardous.
RBRC SEAL
TM
ion battery (or battery pack) indicates that the costs to recycle the battery (or battery
shoe
until blade teeth almost touch cutting line.
you start the cut). Remove hand from guard lever and firmly grip secondary handle (4), as
shown in figure N. Position your body and arm to allow you to resist kickback if it occurs.
its shoe rests flat on the material to be cut. Advance saw along the cutting line until cut is
completed as shown in figure N.
the material.
TROUBLESHOOTING
Problem Possible Cause Possible Solution
installation.
appears.
working outlet. Refer to
for more details.
too hot or too cold. pack to a surrounding air
temperature of above 40
maximum thermal limit. down.
To
maximize the life of the allow to charge.
battery pack it is designed
to shutoff abruptly when
the charge is depleted.)
For assistance with your product, visit our website www.blackanddecker.com for the location
1-800-544-6986.