3
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are specially designed to lter out
microscopic particles.
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and
other construction activities. Wear protective clothing and wash exposed areas with
soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote
absorption of harmful chemicals.
WARNING:Use of this tool can generate and/or disperse dust, which may cause
serious and permanent respiratory or other injury. Always use NOSH/OSHA approved
respiratory protection appropriate for the dust exposure. Direct particles away from face and
body. Always operate tool in well-ventilated area and provide for proper dust removal. Use dust
collection system wherever possible.
WARNING: ALWAYS wear proper personal hearing protection that conforms to
ANSI S12.6 (S3.19) during use.Under some conditions and duration of use, noise from this
product may contribute to hearing loss.
SYMBOLS
V .................volts A .................amperes
Hz ............... hertz W .................watts
min .............minutes or AC ...... alternating current
or DC ..direct current
n
o ................no load speed
...............Class I Construction ................earthing terminal
(grounded) ................safety alert symbol
................Class II Construction .../min or rpm.....revolutions or reciprocation
(double insulated) per minute
...............Read instruction manual before use
................Use proper respiratory protection
...............Use proper eye protection ................Use proper hearing protection
SAVE THESE INSTRUCTIONS
Minimum Gauge for Cord Sets
Volts Total Length of Cord in Feet
Ampere Rating
Functional Description
Figure A
1
2
4
A
3
5
6
7
8