Black & Decker BDL110S Laser Level User Manual


  Open as PDF
of 6
 
WARNING: Read and understand all instructions. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Safety Instructions
• Do not operate the laser in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust.
• Use the laser only with the specifically designated batteries. Use of any other batteries
may create a risk of fire.
• Store idle laser out of reach of children and other untrained persons. Lasers are dangerous
in the hands of untrained users.
• Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one laser, may create a risk of injury when used on
another laser.
• Do not use optical tools such as a telescope or transit to view the laser beam. Serious eye
injury could result.
• Do not place the laser in a position which may cause anyone to intentionally or
unintentionally stare into the laser beam. Serious eye injury could result
•Turn the laser off when it is not in use. Leaving the laser on increases the risk of staring
into the laser beam.
• Repairs and servicing MUST be performed by a qualified repair facility. Repairs performed
by unqualified personnel could result in serious injury.
• WARNING: DO NOT DISASSEMBLE THE LASER. There are no user serviceable
parts inside. Disassembling the Laser will void all warranties on the product. Do not modify
the product in any way. Modifying the tool may result in Hazardous Laser Radiation
Exposure.
• Do not operate the laser around children or allow children to operate the laser. Serious eye
injury may result.
• Do not remove or deface warning labels. Removing labels increases the risk of exposure
to radiation.
• Position the laser securely. Damage to the laser or serious injury could result if the laser
falls.
• CAUTION: Occasionally, pipes and electrical wiring may not be detected by this
product. The sensor will not detect hot wires inside metal pipe or metal conduit, behind
metallic wall covering, or behind some plywood or other dense materials.
• CAUTION: Material thickness, type of material, moisture content, and other variables
can effect sensing results. The sensor may detect electric wiring or pipes in the same
manner that studs are detected depending on their location to the wall surface. Use
caution when drilling, nailing or cutting into walls, floors and ceilings which may contain
electrical wiring or pipes. These items may be detected by the sensor in the same manner
in which studs are detected. Because studs are normally spaced 16 inches (406 mm) or
24 inches (610 mm) apart and are usually 1-1/2 inches (38 mm) wide, beware of anything
closer together or of a different width. Always turn off the power when working near
electrical wires.
• CAUTION: Use of controls or adjustments or performance of procedures other than
those specified in this manual may result in hazardous laser radiation exposure.
• This product is intended for use in a temperature range of 41°F(5°C) - 104°F(40°C).
The label on your tool may include the following symbols.
V ..........................volts mW......................milliwatts
nm ........................wavelength in nanometers IIIa ......................Class IIIa Laser
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
INSTRUCTION MANUAL
BB
BB
uu
uu
ll
ll
ll
ll
ss
ss
ee
ee
yy
yy
ee
ee
TT
TT
MM
MM
LL
LL
aa
aa
ss
ss
ee
ee
rr
rr
LL
LL
ee
ee
vv
vv
ee
ee
ll
ll
//
//
SS
SS
tt
tt
uu
uu
dd
dd
--
--
MM
MM
ee
ee
tt
tt
aa
aa
ll
ll
--
--
AA
AA
CC
CC
WW
WW
ii
ii
rr
rr
ii
ii
nn
nn
gg
gg
SS
SS
ee
ee
nn
nn
ss
ss
oo
oo
rr
rr
Cat No. BDL110S Form # 588032-00 (MAR-04) Copyright © 2004 Black & Decker Printed in China
BEFORE RETURNING THIS PRODUCT
FOR ANY REASON PLEASE CALL
1-800-54-HOW-TO (544-6986)
IF YOU SHOULD EXPERIENCE A PROBLEM
WITH YOUR BLACK & DECKER PRODUCT,
CALL 1-800-54-HOW-TO (544-6986)
BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No., TYPE No., AND
DATE CODE (e.g. 20000130M). IN MOST CASES, A BLACK & DECKER REPRESENTATIVE CAN RESOLVE
YOUR PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL.
YOUR FEEDBACK IS VITAL TO BLACK & DECKER.
FEATURES
1.) Marking/Hanging Insert
2.) Detector Button
3.) Laser On/Off Button
4.) Metal Position
5.) Stud Position
6.) Slide Switch
7.) AC Wire Indicator LED
8.) Red LED’s (Light
Emitting Diodes)
9.) Green LED
10.) Self-Leveling Laser
Lines
11.) Battery Compartment
Cover
12.) Hanging Insert (keyhole)
13.) Spacer Insert
14.) Drywall Pin
1
3
4
5
2
Tayl
orMade
TaylorMade
BonAir
Bo
n
A
ir
C.
C.
C.C
.
B
o
n

A
i
r
C
.
C
.
T
a
ylo
r
M
ade
Bon
Air
Bo
n

A
i
r
C.
C
.
C.
C.
7
9
Before
Avant
Antes
After
Après
Después
Wall
Mur
Pared
Spacer
Pièce d’espacement
Pieza espaciadora
Catalog No. BDL110S
8
6
10
next