Filter
Top Products
58
CUTTING ALUMINUM
Aluminum extrusions used for making aluminum screens and storm windows can easily be cut with your compound
miter saw. When cutting aluminum extrusions, or other sections that can be cut with a saw blade and are within the
capacity of the machine, position the material so the blade is cutting through the smallest cross-section (Fig. 31).
The wrong way to cut aluminum angles is illustrated in Fig. 32. Be sure to apply a stick wax to the blade before
cutting aluminum stock. This stick wax is available at most industrial mill supply houses. The wax provides proper
lubrication and keeps chips from adhering to the blade.
Never apply lubricant to the blade while the machine is running.
FENCE
BLADE
RIGHT
FENCE
BLADE
WRONG
Fig. 32
Fig. 31
CUTTING BOWED MATERIAL
When cutting flat pieces, first check to see if the material is bowed. If it is, make sure the material is positioned on the
table as shown in Fig. 33.
If the material is positioned the wrong way (Fig. 34), the workpiece will pinch the blade near the completion of the
cut and may cause the saw to jump or move.
RIGHT
WRONG
Fig. 33
Fig. 34
Fig. 30E
Fig. 30F
Fig. 30C
Fig. 30D