Filter
Top Products
replacement.
7
English
5. Press the ON/OFF switch and start working.
6. Push only with enough force to keep bit from bouncing. Pushing
harder will not increase chipping speed.
7. To stop the tool, release the ON/OFF switch. Always turn the tool
OFF when work is finished and before unplugging.
8. D5830 and D25850 are chipping hammers only. They have no
drilling capabilities.
Accessories
Recommended accessories for use with your tool are available at extra
cost from your distributor or local service center.
CAUTION: The use of any non-recommended accessory may be
hazardous.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
organizations, always using identical replacement parts.
Full Warranty
D
EWALT heavy duty industrial tools are warranted for one year from
date of purchase. We will repair, without charge, any defects due to
faulty materials or workmanship. For warranty repair information, call
1-800-4-D
EWALT. This warranty does not apply to accessories or
damage caused where repairs have been made or attempted by
others. This warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
In addition to the warranty, D
EWALT tools are covered by our:
30 DAY NO RISK SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of your
D
EWALT heavy duty industrial tool, simply return it to the participating
seller within 30 days for a full refund. Please return the complete unit,
transportation prepaid. Proof of purchase may be required.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-D
EWALT for a free
D25550
1 9/16" (39mm)
ROTARY HAMMER
WARNING
DEWALT INDUSTRIAL TOOL CO.,
701 EAST JOPPA ROAD, BALTIMORE, MD 21286 USA
FOR SERVICE INFORMATION, CALL 1-800-4-DEWALT
www. D
E
WALT.com
FOR SAFE OPERATION, READ
INSTRUCTION MANUAL. ALWAYS
USE PROPER EYE AND
RESPIRATORY PROTECTION.
ALWAYS USE SIDE HANDLE. FOR
SAFE OPERATION USE ONLY
IDENTICAL REPLACEMENT PARTS.
À TITRE PRÉVENTIF, LIRE LE GUIDE
D'UTILISATION.
MADE IN ENGLAND
AVERTISSEMENT
TYPE 1 SER.
120V AC
60Hz
11.0 A (NOM 11,0 A)
n
o
140 - 280 RPM
n
o
1330 - 2660 BPM
582429-00/D25500 etc 1/29/03 9:29 AM Page 7