Filter
Top Products
28
When ripping work less than 4 inches wide, a push stick should be used to complete the feed and could easily be
made from scrap material by following the pattern shown in Fig. 60.
PUSH STICK
MAKE FROM 1/2in. OR 3/4in.
WOOD OR THICKNESS
LESS THAN WIDTH OF
MAT’L. TO BE CUT
CUT OFF HERE TO
PUSH 1/4in. WOOD
CUT OFF HERE TO
PUSH 1/2in. WOOD
NOTCH TO HELP
PREVENT HAND
FROM SLIPPING
1/2in. SQUARES
CONSTRUCTING A PUSH STICK
Fig. 60