Filter
Top Products
6
ENGLISH
• For continuous operation, press the lock-on button (2)
and release the speed switch. This option is available
only at full speed. This option does not work in reverse
rotation.
• To switch the tool off, release the speed switch. To
switch the tool off when in continuous operation, press
the speed switch once more and release it.
Accessories
The performance of your tool depends on the accessory
used. Black & Decker accessories are engineered to high
quality standards and designed to enhance the performance
of your tool. By using these accessories you will get the very
best from your tool.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
Warning! Before performing any maintenance,
switch off and unplug the tool.
• Regularly clean the ventilation slots in your tool using a
soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the new
plug.
• Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality
plugs. Recommended fuse: 5 A.
Technical data
Voltage V
DC
AR, B2C
220–240V ~ 50/60Hz 220–240V ~ 50/60Hz
Power input W 480 500
No load speed min
-1
3000 3000
Max drill capacity
Steel/Concrete mm 10 10
Wood mm 20 20
HD4810 HD5010 / HD5010A5
Voltage VDC
AR, B2C
220–240V ~ 50/60Hz 220–240V ~ 50/60Hz
Power input W 500 500
No load speed min-1 2800 0-2800
Max drill capacity
Steel/Concrete mm 10 10
Wood mm 20 20
HD5010KHA7 HD5010VA5
Voltage V
DC
AR, B2C 220–240V ~ 50/60Hz
Power input W 550
No load speed min
-1
0-2800
Max drill capacity
Steel/Concrete mm 10
Wood mm 20
HD5513V / HD5513KHA
HD5513KA40