Filter
Top Products
The Model HEAT PRO package includes one hot air
tool.
Model HEAT PRO Specifications
Wattage up to 1200 Watts
Temperature Dual Temperature
Low 500°F / High 1000°F
Volts 120 Volts
AMPS 10 AMPS
Heat Output 68 BTU
Weight 1.4 lbs.
Cord Length 6 feet
Settings Low, Off, High
Operation of the Model HEAT PRO
The following instructions are a general guideline
for using the Model HEAT PRO hot air tool. Every
project is different so use these instructions as a
starting point to determine the best heat setting
and distance for your project.
Before plugging the Model HEAT PRO into an electri-
cal outlet make sure the switch is in the Off position.
1. Plug into a standard 3-hole outlet.
2. To start, slide the switch to either the Low or
High position. The motor-driven fan noise will
indicate the unit is running. The heating coil
will light up and slowly turn red.
Note: Smoke may appear during the initial start
up due to the burning of manufacturing oils.
The smoke should disappear in less than a
minute.
ƽ Caution: If the blower motor in the hot air tool
does not turn on when the switch is set to
either Low or High, turn the switch to Off
immediately. The heating element will burn
out if it is not cooled by the blower.
3. For instructions on how to strip paint go to
section HOT AIR TOOL OPERATIONAL GUIDE-
LINES, How to Strip Paint.
4. To turn off when finished, slide the switch to
the Off position and unplug. Set the Model
HEAT PRO upright on a stable, level surface.
This will speed up the cooling process because
the air will flow naturally upward over the heat-
ing element. Allow the Model HEAT PRO to
cool completely. Make sure the Model HEAT
PRO is completely cooled before storing.
Model HEAT PRO
Uses and Corresponding Heat Settings
Removal Setting
Soften paint and varnish High
Urethane from furniture and woodwork Low
Stickers and bumper stickers Low
Vinyl flooring High
Linoleum High
Laminate High
Caulk High
Window putty High
Drying
Metal surfaces prior to painting High
Ignition system Low
Heating
Shrink tube/wrap Low
Window shrink coverings Low
Frozen locks and water pipes Low
Bearings and gears for assembly High
Loosening rusted bolts High
Other
Soldering water pipes High
Welding plastic High
Bending plastic/poly carbonate Low
Waxing skis Low
MODEL HEAT PRO ENGLISH 7
Model HEAT PRO How-to Use