Filter
Top Products
8
ENGLISH
(Original instructions)
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you nd one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product available
for separate collection.
z
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environ-
mental pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker ofce at
the address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
Technical data
KW750 (Type 4)
Input voltage V
ac
230
Power input W 750
No-load speed min
-1
16,500
Planing width mm 82
Planing depth mm 2
Rebating depth mm
12
Weight kg 2.9
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a
h
) <2.5 m/s
2
uncertainty (K) 1.5 m/s
2
Level of sound pressure according to EN 60745:
Sound pressure (L
pA
) 83.9 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 94.9 dB(A), uncertainty (K) 3 dB(A)
EC declaration of conformity
MACHINERY DIRECTIVE
%
KW750
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, 2004/108/EC
EN 60745-1, EN 60745-2-14
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
le and makes this declaration on behalf of Black & Decker.
_
Kevin Hewitt
Vice-President Global Engineering
Black & Decker Europe, 210 Bath Road, Slough,
Berkshire, SL1 3YD
United Kingdom
11/11/2010