Filter
Top Products
Topping up the mill with seasonings
•Place the mill on a level and clean surface.
•Hold the mill by the mill housing (1) with
one hand. Turn the cap (3) in a counter-
clockwise direction to remove it from the
housing and open the mill seasoning lid
(5a/5b).
•Now top up with pepper/salt, using the
appropriate openings. It is also possible
to add alternative spices or seasonings
for milling if required. Note: The mill sea-
soning lids (5a+5b) are marked with the
letters “P” for pepper and “S” for salt.
•Close the mill seasoning lid (5a/5b) once
more and turn the cap (3) in a clockwise
direction to screw it back onto the housing.
Using the mill
•Once you have inserted the batteries and
topped up with milling seasonings hold the
mill firmly in one hand and tip it forward at
least 90°, in the direction of the salt/pepper
opening.
•The mill will begin to work automatically,
as soon as it is tipped more than 90°.
Adjusting the milling fineness
•In order to obtain a coarser milling result
turn the adjustment screw (7) on the front
of the mill in a counter-clockwise direction.
•In order to obtain a finer milling result turn
the adjustment screw (7) on the front of
the mill in a clockwise direction.
Cleaning and maintenance
•Do not leave depleted batteries in the mill.
•Always replace all 6 batteries at the same
time. Avoid using old and new batteries
together at the same time.
•Clean the external parts of the mill with a
dry cloth. Never put the mill into the dish-
washer and do not immerse it in water.
38 ENGLISH