Filter
Top Products
-4-
:7/?::7>-D49>@7,?0/2=4;;492>@=1,.0>
B309;0=1:=8492,9:;0=,?4:9B30=0?30
.@??492?::78,D.:9?,.?34//09B4=492
Contact with a "live" wire will make exposed
metal parts of the tool "live" and shock the
operator.
&>0.7,8;>:=:?30=;=,.?4.,7B,D?:
>0.@=0,9/>@;;:=??30B:=6;40.0?:,
>?,-70;7,?1:=8Holding the work by hand
or against your body is unstable and may
lead to loss of control.
Do not drill, fasten or break into existing walls
or other blind areas where electrical wiring
may exist. If this situation is unavoidable,
disconnect all fuses or circuit breakers feeding
this worksite.
7B,D> B0,= >,10?D 2:2270> := 0D0
;=:?0.?4:9B309@>492?34>?::7
(0,=0,=;=:?0.?:=>B309@>492?30?::71:=
0C?09/0/;0=4:/>Prolonged exposure to
high intensity noise can cause hearing loss.
&>0?34.6.@>34:90/27:A0>,9/7484??30
0C;:>@=0?480-D?,64921=0<@09?=0>?
;0=4:/>Vibration caused by hammer-drill
action may be harmful to your hands and
arms.
$0.@=0?308,?0=4,7-04921,>?090/0A0=
3:7/4?49D:@=3,9/:=,.=:>>D:@=702>
Unstable support can cause loss of control
and injury.
A:4/,..4/09?,7>?,=?4920>@=0?30
1:=B,=/=0A0=>0 >B4?.3 4> 49 ?30 :11
;:>4?4:9-01:=049>0=?492-,??0=D;,.6
Carrying appliances with your finger on the
switch or inserting the battery pack into an
appliance with the switch on invites
accidents.
#08:A0-,??0=D;,.6-01:=0.3,92492
,..0>>:=40> Accidental starting may occur
because battery appliances with a battery
inserted are in the operative condition.
0;=0;,=0/1:=,=0,.?4:9?:=<@0B309
G>0,?492H:==08:A492,1,>?090= The
screwdriver housing may tend to twist in the
opposite direction of bit rotation when
“seating” or removing a fastener depending
on the torque setting of the tool.
:9:?@>0/@77:=/,8,20/-4?>,9/
,..0>>:=40> When installing an accessory,
insert the shank of the bit well within the
chuck. Be sure the chuck has locked onto
the bit correctly.
:9:?=@9?30?::7B3470.,==D4924?,?
D:@=>4/0 A spinning bit could become
entangled with clothing and injury may result.
!7,.0?30?::7:9?:?301,>?090=:97DB309
?30>.=0B/=4A0=4>>B4?.30/:11 Rotating
driver tools can slide off the fastener.
:9:?@>0?34>?::7,>,/=477 Tools
equipped with shut-off clutches are not
designed for drilling applications. The clutch
can shut off automatically and without
warning.
0.,=01@7B309/=4A4927:92>.=0B>F
?30=04>,=4>6:1>74/492:11?301,>?090=
30,//0;09/492:9?D;0:1>:.60?:=-4?
@>0/First test the run-down of a fastener
and pay attention during the screw driving
process to ensure you do not injure yourself
if the tool bit or socket slides off of the
fastener.
$:80 /@>? .=0,?0/ -D
;:B0=>,9/492>,B492
2=49/492/=477492,9/:?30=.:9>?=@.?4:9
,.?4A4?40>.:9?,49>.3084.,7>69:B9?:
.,@>0.,9.0=-4=?3/010.?>:=:?30=
=0;=:/@.?4A03,=8 Some examples of
these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks, cement and
other masonry products.
• Arsenic and chromium from chemically
treated lumber.
Your risk from these exposures varies
depending on how often you do this type of
work. To reduce your exposure to these
chemicals, work in a well-ventilated area and
work with approved safety equipment such
as dust masks designed to filter out
microscopic particles.
!
WARNING
$,10?D#@70>1:=:=/70>>8;,.?=4A0=>
BM 2609140642 05-09:BM 2609140642 05-09 5/19/09 10:16 AM Page 4