Filter
Top Products
3
Electrical Safety
• Before plugging in the heating appliance,
be certain the outlet voltage supplied is com-
patible with the voltage marked on the name-
plate within 10%. An outlet voltage incompat-
ible with that specified on the nameplate can
result in serious hazards and damage to the
heating appliance.
• Double Insulated heating appliances are
equipped with a polarized plug (one blade is
wider than the other.) This plug will fit in a
polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician to install a polarized outlet. Do
not change the plug in any way. Double
Insulation eliminates the need for the three
wire grounded power cord and grounded power
supply system. Polarized plug inserted in prop-
erly wired outlet insures that no voltage is
supplied to the tool when switch is “OFF”.
• When operating a heating appliance use
Ground Fault Circuit Interrupter (GFCI)
on the circuit or outlet. Don’t expose heating
WARNING! “READ ALL INSTRUC-
TIONS”. Failure to follow the SAFETY RULES
identified by the BULLET (•) symbols listed
BELOW and other safety precautions, may
result in serious personal injury. Keep these
operating instructions with this product.
Safety Instructions
for Heating Appliances
Work Area
• Keep your work area clean and well lit.
Cluttered and dark areas invite accidents.
• Do not operate heating appliance in explo-
sive atmospheres, such as in the presence of
flammable liquids, gases or dust, dry grass,
leaves and paper. Heating appliances generate
high temperatures which may ignite the dust
or fumes. Combustible materials like dry grass,
leaves and paper will scorch and may catch fire.
• Keep bystanders, children and visitors
away while operating a heating appliance.
Distractions can cause you to lose control.
Product Data - Heat Gun
Model number 1943 LED
Identification number 0 601 943 7..
( Note: This tool is designed and sold for use with alternating current (AC) only.)
Accessory Listing
Spreader
Concentrator
Deflector
Reflector
( * = standard equipment)
Heat Gun Components
1. Nozzle 5. Temperature setting dial
2. Heat shield 6. Two position on off switch
3. Blower speed dial 7. Integral stand surfaces
4. Temperature display
BM 2610910610 9/01 10/4/01, 10:12 AM3