Filter
Top Products
%$' "$
Your tool is also equipped with a light that turns
on automatically when the switch is activated,
for better visibility when driving (Fig. 1).
$#$ ""
Your tool is equipped with a bit and storage
area that is conveniently located in the handle
base where it is always handy and unlikely to
get lost or misplaced (Fig. 5).
$!
When the tool is attached to
the belt, position yourself to
avoid entanglement with surrounding objects.
Unexpected entanglement could cause the tool
to fall resulting in injury to the operator or
bystanders.
The optional belt clip accessory will allow you to
conveniently attach your tool to your belt. This
feature will allow you to have both hands free
when climbing a ladder or moving to another
work area.
The belt clip can be attached to either side of
the tool by securing it with a mounting screw.
Always make sure you securely tighten the
mounting screw before use (Fig. 5).
To use clip, turn tool upside down and attach
to your belt.
-11-
FIG. 5
BELT CLIP
BIT AND BIT
STORAGE
AREA
!
WARNING
#$ "#'$
The selector switch allows the tool to be set
for various Drilling/Impact Driving applications.
The mode selector switch has three settings.
#://. .<366 986C provides
slower speeds for drilling with large
diameter bits in wood, metal,
ceramics and plastic.
#://..<366 986C provides
faster speeds for drilling with small
diameter bits in wood, metal,
ceramics and plastic.
<3@381 A3>2 37:+-> +->398
Provides high torque and high
speed to drive screws, bolts, nuts
and other common fasteners.
989>9:/<+>/>2/=/6/->398
=A3>-2?8>36>2/>996-97/=
>9+-97:6/>/=>9: Shifting during rotation of
the chuck can cause damage to the tool.
To change speeds slide switch to desired
setting (Fig. 4).
$9:</@/8>.+7+1/>9>996
+6A+C=-2/-5>97+5/=?</
>2/79./=/6/->9<=A3>-23=0?66C/81+1/.
38>9./=3</.=/>>381 If you have difficulty
fully engaging the switch, lightly squeeze and
release the trigger before pushing the switch
into desired setting.
FIG. 4
!
CAUTION
!
CAUTION
BM 2609140646 07-09:BM 2609140646 07-09 7/29/09 2:18 PM Page 11