Filter
Top Products
-8-
55'/$.;
+5%100'%6$#66'4;2#%-
(41/611.$'(14'/#-+0)
#0;#55'/$.;#&,756/'06514%*#0)+0)
#%%'5514+'5. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
Move reverse switch lever to the center “OFF”
position. Rotate the chuck sleeve counter-
clockwise viewing from chuck end, and open
chuck to approximate drill bit diameter. Insert
a clean bit up to the drill bit flutes for small bits,
or as far as it will go for large bits. Close chuck
by rotating the chuck sleeve clockwise and
securely tighten by hand (Fig. 2).
101675'6*'219'41(6*'
&4+..9*+.')4#52+0)%*7%-
61.115'0146+)*6'0$+6 Friction burn or hand
injury is possible if attempting to grasp the
spinning chuck.
!
WARNING
!
WARNING
CHUCK SLEEVE
DRILL BIT
BIT HOLDER
SCREWDRIVER BIT
FIG. 2
BM 2610034437 03-14_ADS181 3/27/14 12:08 PM Page 8