Filter
Top Products
The tool must be supported with the auxiliary
handle. The handle must be thread ed into the
front housing of the tool (Fig. 1).
Your tool is equipped with a light that turns on
automatically when the switch is activated for
better visibility during operation.
The light is maintenance free and was
designed to last the life of your tool (Fig. 1).
The safety switch is designed to prevent
accidental starts. To operate safety switch,
press the release button with your thumb on
either side of handle to disengage the lock,
then pull the trigger (Fig. 1). When the trigger
is released the button will engage the safety
switch automatically, and the trigger will no
longer operate.
'$- 23 13(-& 3'$ 3..+
'.+#(36(3'!.3'' -#2
The torque from the motor can cause the tool
to twist.
To turn tool “ON”, squeeze the trigger switch.
To turn the tool “OFF”, release the trigger
switch, which is spring loaded and will return
to the off position automatically.
Your saw should be running at full speed
BEFORE starting the cut, and turned off only
AFTER completing the cut. To increase switch
life, do not turn switch on and off while cutting.
Always hold the saw handle with one hand
and the auxiliary handle with the other (Fig. 4).
Maintain a firm grip and operate the switch
with a decisive action. Never force the saw.
Use light and continuous pressure.
-9-
/$1 3(-&-2314"3(.-2
!
WARNING
FIG. 4
BM 2610034438 03-14_BSH180 3/27/14 1:59 PM Page 9