Filter
Top Products
5?/;::1/@.-@@1>E<-/7
2>;9@;;8.12;>19-75:3-:E
-??19.8E -06A?@91:@? ;> /4-:35:3
-//1??;>51?. Such preventive safety measures
reduce the risk of starting the tool accidentally.
%$& $!(
%%!$%
To avoid loss of control,
ensure bit is locked in chuck
by pulling on bit after it has been inserted.
&41/4A/7-//1<@?;:8E?@-:0->0"
41D-3;:-8?4-:7-//1??;>51?C5@4<;C1>
3>;;B1
Your tool is equipped with a quick release
chuck. To insert an accessory, simply pull
locking sleeve forward, insert desired accessory
into chuck and release locking sleeve (Fig. 2).
To remove an accessory, pull locking sleeve
forward and simply remove it from the chuck.
-9-
??19.8E
!
WARNING
!<1>-@5:3:?@>A/@5;:?
($%"! &$!
&$$%)&
Your tool is equipped with a variable speed
trigger switch. The tool can be turned "ON" or
"OFF" by squeezing or releasing the trigger.
The speed can be adjusted from the minimum
to maximum nameplate RPM by the pressure
you apply to the trigger. Apply more pressure
to increase the speed and release pressure to
decrease speed (Fig. 1).
The lithium ion battery is protected against
deep discharging by the “Electronic Cell
Protection (ECP)”. When the battery is empty,
the tool is switched off by means of a
protective circuit.
$
When the trigger switch is released it
activates the brake to stop the chuck quickly.
This is especially useful in the repetitive
driving and removal of screws.
!$)$$($%
($&$$!
After tool use, lock trigger in
“OFF” position to help prevent
accidental starts and accidental discharge.
Your tool is equipped with a forward/
reversing lever and trigger lock located above
the trigger (Fig. 3). This lever was designed
for changing rotation of the bit, and for locking
the trigger in an “OFF” position.
For forward rotation, (with chuck pointed
away from you) move the lever to the far left.
For reverse rotation move the lever to the far
right. To activate trigger lock move lever to
the center off position.
;:;@/4-:3105>1/@5;:;2
>;@-@5;: A:@58 @41 @;;8
/;91?@;-/;9<81@1?@;<Shifting during
rotation of the chuck can cause damage to
the tool.
!
WARNING
FIG. 2
SCREWDRIVER
BIT
BIT HOLDER
SCREWDRIVER BIT
CHUCK
LOCKING SLEEVE
FIG. 3
FORWARD/REVERSING
LEVER & TRIGGER LOCK
!
WARNING
!
CAUTION
BM 2609140889 06-12_BM 2609140889 06-12 6/26/12 10:42 AM Page 9