Filter
Top Products
| 19
Bosch Power Tools 2 609 140 572 | (8.9.08)
Troubleshooting
Issue Remedy
Noise is
coming
from area
between
the tool’s
legs
No action typically
required. The sound
is from the motor is
used to measure
the angle between
the legs.
MTR value
doesn’t
correspond
to the miter
scale on a
particular
saw.
The Miterfinder pro-
vides miter angle
values for saws with
miter scales that
have 0° as the set-
ting for a perpen-
dicular cut.
When making miter
cuts on tools that
have 90° as the per-
pendicular cut set-
ting, the MTR angle
provide by the
Miterfinder needs
to be subtracted
from 90°.
It is not
clear as to
how to posi-
tion the
workpiece
on the saw.
Follow the saw’s
instructions regard-
ing the positioning
and clamping of the
workpiece.
Battery
symbol is
flashing
Replace batteries
“– – – –”
appears in
display
The tool is not
designed to per-
form the desired
operation
daf220_bu_2609140572_003.fm Seite 19 Montag, 8. September 2008 2:22 14