Filter
Top Products
English - 1
1 Dust protection cap
2 Locking sleeve
3 Depth stop
4 Push-button for depth-stop adjustment
5 Impact stop switch
6 On/Off switch
7 Rotational direction switch
8 Battery
9 Battery unlocking button
10 Auxiliary handle
11 Clamping band
12 Auxiliary hooks
13 Interlock
14 Knurled ring
Not all of the accessories illustrated or described are
included as standard delivery.
Measured values determined according to
EN 50 144.
Typically the A-weighted noise levels of the prod-
uct are: sound pressure level: 91 dB (A); sound
power level: 104 dB (A).
Wear hearing protection!
The typically weighted acceleration is 11 m/s
2
.
Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the enclosed booklet
must be observed. Before using for the first
time, ask for a practical demonstration.
■ Wear protective glasses and hearing protec-
tion.
■ For long hair, wear hair protection. Work only
with closely fitting clothes.
■ Before each use, check the machine and bat-
tery. If damage is detected, do not use the ma-
chine. Have repairs performed only by a qual-
ified technician. Never open the machine your-
self.
■ Use power tools only with specifically des-
ignated battery packs. Use of any other bat-
tery packs may create a risk of injury and fire.
■ Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with wa-
ter. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
■ Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as
when transporting and storing, always set
the rotational direction switch to the centre
position. Otherwise danger of injury is given
when unintentionally actuating the On/Off
switch.
Tool Specifications
Rotary Hammer GBH 24 V
Order number 0 611 256 ...
Rotary Hammer GBH 24 VF
Order number 0 611 262 ...
Rated power [W] 350
Output power [W] 270
Rated speed [rpm] 0–1 000
Impact rate [bpm] 0–4 400
Impact energy
per stroke
[J] 1.3
Tool holder SDS-plus
Spindle collar diameter [mm] 43
Drilling output:
- Concrete
(twist drill bit)
[mm] 4–20
- Wood [mm] max. 20
- Steel [mm] max. 10
Weight with battery,
approx.
[kg] 3.8
Battery NiCd
Order number 2 607 335 446
Temperature control NTC
Rated voltage [V] 24
Capacity [Ah] 2.0
Weight, approx. [kg] 1.4
Battery NiMH
Order number 2 607 335 510
Temperature control NTC
Rated voltage [V] 24
Capacity [Ah] 3.0
Weight, approx. [kg] 1.4
Please observe the order number of your machine.
The trade names of the individual machines may vary.
Machine Elements
Noise/Vibration Information
For Your Safety
12 • 1 619 929 596 • 02.12