Filter
Top Products
English - 4
■ Before any work on the machine itself, pull
the mains plug.
■ Wear protective gloves.
■ The saw blades used must correspond to
the characteristic data in these operating
instructions.
■ Use only saw blades with an allowable
speed matching at least the no-load speed
of the machine.
For tightening and loosening the clamping
bolt 19, hold the clamping flange 20 firmly with a
spanner or set the saw blade onto a wooden sur-
face.
Removing (see figure )
Tilt back the retracting blade guard 9 and hold
firmly.
Unscrew clamping bolt 19 with the Allen key 12.
Remove clamping flange 20.
Remove the saw blade.
Mounting (see figure )
Clean the saw blade and all the clamping parts to
be assembled.
Tilt back the retracting blade guard 9 and hold
firmly.
Place the saw blade onto the mounting flange 21.
Assemble the clamping bolt 19 with the washer
and assemble the clamping flange 20.
Tighten the clamping bolt 19 with the Allen
key 12. Tightening torque: 6–9 Nm; equivalent to
hand-tight plus
1
/
4
turn.
Take care that the mounting positions of
the mounting flange 21 and clamping
flange 20 are correct.
When mounting: Ensure that the cutting di-
rection of the teeth (direction of arrow on
saw blade) and the direction-of-rotation ar-
row on the blade guard match.
The dust that is produced while working can
be detrimental to health, inflammable or ex-
plosive. Suitable safety measures are re-
quired.
Examples: Some dusts are regarded as carci-
nogenic. Use suitable dust/chip extraction
and wear a dust respirator.
External Dust Extraction
The machine can be plugged directly into the re-
ceptacle of a Bosch all-purpose vacuum cleaner
with remote control starting. The vacuum cleaner
starts automatically when the machine is
switched on.
The vacuum cleaner must be suitable for the ma-
terial to be worked.
When vacuuming dry dust that is especially detri-
mental to health or carcinogenic, use a special
vacuum cleaner.
For external dust extraction with a vacuum
cleaner, an extraction adapter must be used as
required (see accessories). Insert extraction
adapter and vacuum connection firmly.
Integrated Dust Extraction
For small jobs, work with the dust bag (acces-
sory). Insert the dust bag connection piece into
the dust ejector 3. Empty the dust bag regularly
to maintain an optimum vacuuming function.
☞
Excessive feed significantly reduces the
performance capability of the machine and
reduces the service life of the saw blade.
Sawing performance and cutting quality depend
essentially on the condition and the tooth form of
the saw blade. Therefore, use only sharp saw
blades that are suited for the material to be
worked.
Wood
The correct selection of the saw blade depends
on the type and quality of the wood and whether
lengthway or crossway cuts are required.
☞
When cutting spruce lengthways, long spi-
ral chips are formed.
Beech and oak dusts are especially detrimental
to health. Therefore, work only with dust extrac-
tion.
Changing the Tool
(see figure )
A
A
A
Dust/Chip Extraction
(see figure )
Operating Instructions
D
2 610 392 415 - Buch Seite 4 Dienstag, 10. Dezember 2002 7:52 07
14 • 2 610 392 415 • TMS • 28.11.02
mikosoft praha s.r.o.
mikosoft praha s.r.o.
mikosoft praha s.r.o.
mikosoft praha s.r.o.