Filter
Top Products
Router Table Assembly
ATTACHING THE FENCE TO THE TABLE
(Fig. 12)
1.From underneath the table, slide two 1/4-20 x 1
1
⁄2″
carriage bolts (31) up through the slots in the tabletop
and the holes in the bottom of the fence. Slide a
washer (27) onto each bolt and loosely attach a
large clamping knob (14) onto each bolt.
2.Make sure that the fence assembly slides smoothly
from front to back.
NOTE: Use the scale on the tabletop as a guide
when aligning the fence for routing operations. Once
the fence is positioned and aligned correctly, tighten
the clamping knobs SECURELY.
INSTALLING THE FENCE
14
FIG. 12
27
31
17