Brother pt300 Work Light User Manual


 
-5-
GENERAL PRECAUTIONS
Use only Brother TZ tapes with this machine. Do not use tapes that do not
have the mark.
Four different tape widths are available: 1/4”(6mm), 3/8”(9mm), 1/2”(12mm)
and 3/4”(18mm).
Do not pull the tape. This may damage the tape cassettes.
Do not clean the machine with alcohol or other organic solvents. Use only a
soft, dry cloth.
Remove the batteries and/or disconnect the AC Adaptor if you do not intend
to use your machine for an extended period of time.
(Note: When power is disconnected, any messages in the working area or the
Message Memory area will be lost.)
Do not put anything onto or into the machine.
Do not expose the machine to high temperatures or high humidity. Never
leave it on the dashboard or in the back of your car.
Do not use the machine in dusty places. Keep it out of both direct sunlight
and rain.
Do not leave any rubber or vinyl on the machine for an extended period of
time. Doing so may cause staining.
After inserting a new tape cassette, advance the tape by holding down the
CODE
key and pressing the
FEED
key once.
Do not touch the print head mechanism. If the head is touched, clean it
immediately with a soft wipe (e.g.cotton swab) to avoid permanent damage.
Use only the AC Adaptor, MODEL AD-30 designed exclusively for this
machine. Use of any adaptor will void warranty.