Filter
Top Products
COJSAWBX Electric Jig Saw Assembly & Operating Instructions
3
OMMON SENSE AND CAUTION ARE FACTORS WHICH CANNOT BE BUILT INTO ANY PRODUCT.
. Keep the work area clean. A cluttered work area may cause accidents. Make sure the work area is well lit.
eat, oil, sharp edges and rough surfaces. Do not
ols without responsible adult supervision. When operating this tool,
ure dry place. The storage area should be lockable and
he job being performed. Do not use low-powered tools for heavy-duty
may get caught in moving parts. Never
r a dust mask when the
the tool by the power cord. Do not pull the power cord to remove the plug from sockets. Keep
est and safest if it is kept clean. Observe the instructions for
the tool and allow it to
e to remove wrenches and other tools.
ure the switch is in the “OFF”
n cords marked and rated for outdoor use. When using
hen impaired by medicine, drugs, or alcohol. Watch what you are doing and
C
THESE FACTORS MUST BE SUPPLIED BY THE OPERATOR. PLEASE REMEMBER:
1
2. Never use tools near flammable liquids or gasses.
3. Prevent electrical shock. Keep the cable away from h
operate if cable is frayed or damaged.
4. Never allow children to operate to
keep children at a safe distance from the work area.
5. Store tool in a safe place. Store your tool in a sec
out of the reach of children.
6. Use a tool designed for t
operations. Never use the machine for other than its intended purpose.
7. Wear suitable clothing. Do not wear loose clothing or jewelry. They
wear rings with protruding parts. Wear a hat over long hair. Wear rubber footwear.
8. Always wear safety goggles and ear protection when using the machine. Wea
work is dusty.
9. Never carry
the power cord away from heat, oil and sharp edges.
10. Never use tool in damp or wet conditions.
12. Maintain the tool with care. This tool works b
maintenance and changing accessories. Keep the tool dry and free of oil and grease.
13. Never carry a plugged-in tool with your finger on the switch. Always switch off
stop moving before putting it down.
14. Before starting the tool, be sur
15. Never move the tool while it is plugged into an electrical outlet. Make s
position when the power cord is plugged-in.
16. When working outdoors, use extensio
machines with a ground connection, an extension cord with a grounded connection should be used and
connected to a grounded outlet.
17. Stay alert. Do not use tools w
use common sense for your safety.