Filter
Top Products
PS07401 7-Inch Polisher / Sander Assembly & Operating Instructions
8
IMPORTANT SAFETY INSTRUCTIONS
Before using this tool, you need to become familiar with the operation of the tool. If you are unsure about the operation of the
tool, or have any questions about the proper use of the tool, call Customer Service at 1-888-287-6981.
Follow these instructions for safe handling of the tool:
• Always secure and support the work piece using clamps. Do not use your hands to hold the piece in place.
• Be sure your work area is clean and secure before turning the power switch into the “ON” position.
• Turn the tool “OFF” and unplug from the power source before making any changes or adjustments to the wheel.
• Do not use solvents containing carbon tetrachloride, ammonia or acetone to clean the Polisher / Sander. Never use
gasoline, paint thinner, or other caustic chemicals that can damage the plastic parts of the tool.
• Always use the appropriate safety gear when operating this tool. Including but not limited, to goggles, dust mask or
respirator. Always work in a well-ventilated area to reduce your exposure to harmful chemicals and dust particles.
• Before installing the sanding wheel or polishing bonnet, make sure you have checked the following:
Use Sander paper and accessories that are rated for 3,000 RPM or greater.
SPECIFIC SAFETY RULES AND/OR SYMBOLS
SYMBOLS
The following symbols may be used on your tool. Be familiar with and learn the symbols to operate the tool safely.
Symbol
Name
Description
V
Volts
Voltage (Potential)
A
Amperes
Current
Hz
Hertz
Frequency (Cycles per Second)
W
Watt
Power
Kg
Kilograms
Weight
Alternating Current
Type of Current
Direct Current
Type of Current
Alternating or Direct Current
Type of Current
Earthing Terminal
Grounding Terminal
Class II Construction
Denotes Double Insulation
min
Minutes
Time
s
Seconds
Time
Diameter
Size of Drill Bits, Grinding Wheel Bits, etc.
No Load Speed
No-load Rotational Speed
…/min
Revolutions per Minute
Revolutions, Surface Speed, Strokes, etc per Minute
1,2,3…
Ring Selector Settings
Speed, Torque or Position Settings
FUNCTIONAL DESCRIPTION
PACKAGE CONTENTS
• Polisher / Sander
• 1 Foam Pad And 1 Wool Polishing Bonnet
• 1 Wrench
• Handle
• Hex Key