Filter
Top Products
PS07425 42 Piece Rotary Tool Kit Operating Instructions
2
Keep your work area clean and well lit. Cluttered work benches and dark work areas may cause accidents or injury.
Keep bystanders, children and visitors away while operating a power tool. Distractions can cause you to lose control.
Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or
against your body is unstable and may lead to loss of control.
Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is
designed.
Do not use the tool if the power switch does not turn it “ON” or “OFF”. Any tool that cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect the power cord before making any adjustments, changing accessories or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
Inhaling dust created as a result of construction projects could be hazardous to your health. Construction dust may contain
chemicals, which are known to cause cancer, birth defects and other reproductive harm in the State of California.
These chemicals could be, but are not limited to: lead from lead based paints, crystalline silica from bricks or cement, arsenic, and
chromium from chemically treated-lumber.
To reduce your risk of exposure to harmful materials: always wear a dust mask that is designed to filter out hazardous microscopic
contaminants, always work in a well ventilated area, and wear other approved safety equipment.
Keep the power cord in good condition, and replace damaged cords immediately. Do not use the cord to pull the plug from the
outlet. Keep the cord away from materials and surfaces that could damage cords. The risk of electric shock increases when the power
cord is damaged.
Always use the appropriate extension cord, making sure it is rated for use with power tools. Always be sure the extension cords
are in good condition, free of cuts or nicks in the insulation. If using the power tool in an outside area with an extension cord, make sure
the cord is rated for outdoor use.
Use common sense while operating this power tool.
Do not use this tool if you are:
• Feeling tired or are under the influence of alcohol or drugs.
• Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts.
• Overreaching or have improper footing. Handling the tool in this way could cause serious injury.
When using this power tool always:
• Wear the proper safety equipment, such as safety goggles, dust masks, gloves, non-skid shoes, etc.
• Check to be sure all adjusting keys or wrenches have been removed before starting the power tool.
• Safety glasses and ear protection must be worn during operation.