Filter
Top Products
INTRODUCTION
160 Series 08/10 Introduction Section 2-3
© 2010 Alamo Group Inc.
INTRODUCTION
The 160 Series Blade is available in widths of 8' and 10' and features a heavy-duty CAT II-III three-point hitch
and quick-hitch. The 10' model is rated for up to 160 PTO HP wheel-type tractors. The Blade is available with
either hydraulic or manual mainframe swing, moldboard angle, and moldboard tilt. The Blade can be offset a
maximum of 37" for working outside the dual wheels on larger horsepower tractors. The 4" diameter solid steel
kingpin, boxed section reinforced 1/2” x 18" moldboard, and the superior strength of the mainframe ensure
dependability. The bolt-on gauge wheels are an excellent feature in helping to control the cutting depth. This is
especially critical when trying to leave a smooth finish. Skid shoes, quick-tach end plates, and single or dual
gauge wheels are optional equipment to help make the a more versatile tool.
At least 20% of the tractor’s weight must be on the front tires with the implement lifted to
provide adequate traction for safe steering under good conditions. Slow down on hills,
rough terrain, and curves.
Front and rear, and left and right are determined by the normal direction of travel (the same as on your
automobile).