Filter
Top Products
INTRODUCTION
225 Series 09/10 Introduction Section 2-3
© 2010 Alamo Group Inc.
INTRODUCTION
The 225 Series blade is available in widths of 8’, 10' and 12' and features a massive CAT II-III three-point hitch
and quick-hitch. The 12' model is rated for up to 175 PTO HP wheel-type tractors. Hydraulic adjustment of the
mainframe swing, moldboard angle, and moldboard tilt is standard for easier operation. The 225 Series blade
features a maximum of 46" of offset for working hard-to-reach areas. The boxed-section, reinforced 1/2” x 20"
moldboard, 4-1/2” solid steel kingpin, and massive hitch and mainframe ensure years of dependable service.
Skid shoes, quick-tach end plates, and dual gauge wheels are optional equipment adding to the many possible
uses of the 225 Series blade.
At least 20% or the tractor’s weight must be on the front tires with the implement lifted to
provide adequate traction for safe steering under good conditions. Slow down on hills, rough
terrain, and curves.
Front and rear, and left and right are determined by the normal direction of travel (the same as on your
automobile).