Filter
Top Products
7
5. Finally, view the same object through only the left side of the binocular, and rotate the diopter adjustment
(left eyecup) until it appears sharp to your left eye (do not touch the center focus knob while doing this).
is compensates for any vision differences between your left and right eyes.
Once set, note the number on the left and right binocular tubes that the index mark on each eyecup is lined up with.
With the display focus and diopter adjustment set to these positions, you should be able to obtain sharp viewing of
objects at any distance by simply adjusting the center focus knob while you look through the binocular. ere is no
need to re-adjust the display focus or diopter adjustment, unless you share the binocular with another user, or if your
eyes become tired over a long period of use.
OPERATIONAL SUMMARY
While looking through the binocular, depress the power button once to activate the Vivid Display. Place the aiming
circle (located in the center of the field of view) upon a target at least 10 yards away, depress and hold the power
button down until the range reading is displayed near the bottom of the in-view display. Crosshairs surrounding the
aiming circle indicate that the laser is being transmitted. Once a range has been acquired, you can release the power
button. e crosshairs surrounding the aiming circle will disappear once the power button has been released (i.e. the
laser is no longer being transmitted). Note: Once activated, the display will remain active and display the last distance
measurement for 3 seconds. You can depress the power button again at any time to distance to a new target. As with
any laser device, it is not recommended to directly view the emissions for long periods of time with magnified lenses.
e maximum time the laser is transmitted (fired) is 10 seconds. To re-fire, press the button down again.
VIVID DISPLAY INDICATORS
Your Fusion 1600 ARC Vivid Display™ incorporates the following illuminated indicators: