Filter
Top Products
Operating Instructions and Parts Manual
Pin Nailer
www.chpower.com
3
Description
This pin nailer is designed for tacking decorative trim, glazing strips, and picture frame
assembly. Features include: convenient side loading magazine which holds up to
135 pins, no-mar tip, oil free, rubber comfort grip, swivel plug, work contact element,
self-adjusting pin length mechanism, and adjustable exhaust.
Figure 1 - CHN71500 Pin Nailer
Specifications
Model CHN71500
Requires: 0.15 Avg SCFM using 10
fasteners per minute at 90 psi
Air Inlet: 1/4 inch NPT
Fastener Size Range:
23g micropins - 3/8 inch to 7/8 inch
Magazine Capacity: 135 fasteners per
load
Weight: 2 lbs.
Length: 9-1/4 inches
Height: 7-1/4 inches
Maximum Pressure: 100 psi
Pressure Range: 60 psi to 100 psi
Locate model number and date code on
magazine and / or tool body. Record below:
Model #: _____________________________
Date Code: ___________________________
Retain these numbers for future reference.