Filter
Top Products
CL157500AV
www.campbellhausfeld.com
5
opeRatInG notes
1. Take time to lubricate tool during a
big job (every 500 screws) or when
using 2 to 3 inch screws. Follow
instructions for air motor and clutch
mechanism lubrication.
2. When driving fasteners into soft
wood no pilot hole is needed. Space
screws a minimum of 1 inch apart to
avoid splitting. The high torque tool
will drive screws up to 3 inch long.
3. Drill a pilot hole 90% of screw length
when working with hardwoods. The
high torque tool will drive screws up
to 1-1⁄2 inch long.
Maintenance
stoRaGe
Lubricate air tool before storing. Follow
air motor lubrication instructions with an
exception to Step 4. Only run the air tool
for 2 to 3 seconds instead of 20 to 30
seconds to allow more oil to remain in
the air tool.
technIcal seRvIce
For information regarding the operation
or repair of this product, please call
1-855-504-5678.
Replacement paRts
InFoRmatIon
For information regarding where to order
replacement parts, call toll free 1-855-
504-5678.
Please provide the following information:
• Model number
• Stamped code
• Part number and description
Address parts correspondence to:
Campbell Hausfeld
100 Production Drive
Harrison, Ohio 45030 U.S.A.