Filter
Top Products
7
Operating Instructions SN338K00
www.chpower.com
Fasteners
STAPLES
The following Campbell Hausfeld finishing fasteners are available at local retail stores. If you need help locating any item, call
customer service at 1-800-543-6400. Campbell Hausfeld fasteners meet or exceed ASTM Standard F1667.
Model Length
Wire
Diameter
Crown
Size Point Finish Collation
Staples
Per Stick
Staples
Per Box
FN158K00 1/2 inch 18 Gauge 1/4 inch Chisel Galvanized / Vinyl Coated Adhesive 100 5000
FN168K00 5/8 inch 18 Gauge 1/4 inch Chisel Galvanized / Vinyl Coated Adhesive 100 5000
FN180615 1/2 inch 18 Gauge 1/4 inch Chisel Galvanized / Vinyl Coated Adhesive 100 1000
FN180620 3/4 inch 18 Gauge 1/4 inch Chisel Galvanized / Vinyl Coated Adhesive 100 1000
FN180625 1 inch 18 Gauge 1/4 inch Chisel Galvanized / Vinyl Coated Adhesive 100 1000
FN180630 1-1/4 inch 18 Gauge 1/4 inch Chisel Galvanized / Vinyl Coated Adhesive 100 1000
FN208K00 3/4 inch 18 Gauge 1/4 inch Chisel Galvanized / Vinyl Coated Adhesive 100 5000
FN258K00 1 inch 18 Gauge 1/4 inch Chisel Galvanized / Vinyl Coated Adhesive 100 5000
INTERCHANGE INFORMATION
Staples used in the SN338K00 Finishing Stapler will also work in: Senco LN4450, SJS-LR, SKS L11-15, Hitachi N3804A, Duofast BN-1832S,
KN-1848, Stan-Tech SDS 18-14, Atro Minor 90/30, 90/32, 90/40, and Porter Cable NS100.