Filter
Top Products
9
Features
ANTI-DRY FIRE
This tool is equipped with an Anti-Dry
Fire feature. This prevents the Work
Contact Element (WCE) from being
pushed in when only a few nails remain.
Simply load new nail clip behind
remaining nails to continue shooting.
TETHERED NO-MAR /
STUD FINDER TIP
The tool is fitted with a no-mar tip which
also acts as a convenient stud finder. To
utilize the no-mar tip, simply slide it over
the tools WCE.
LOW NAIL INDICATOR LIGHTS
The tool is equipped with lights on either
side of the tool near the nose. When the
nail count becomes low, the lights will
turn yellow. When the nail count is nearly
out, the Anti-Dry Fire feature will engage
and the lights will turn red. (See Loading
the Nailer section).
NAIL PLACEMENT LASER POINTER
The tool is equipped with a laser mounted
near the nose. This can be seen through
the wide slots in the WCE and / or no-
mar tip. The laser will indicate exact
placement of the fastener.
This is a Class IIIA
Laser Product that
emits laser radiation. Do not stare into beam
or view directly with optical instruments.
BUBBLE LEVEL
The tool is equipped with a bubble level
located on the head cap. This will assist
in aligning the tool for level driving of the
fastener. The bubble level will assist in
vertical and horizontal positioning of the
tool.
Getting To Know Your Straight Finish Nailer Like A Pro
www.chpower.com
Figure 6 - Components of the Straight Finish Nailer
CHN70500
Operating Instructions and Parts Manual
Pull-out Warning
Decal
Tethered
No-mar /
Stud finder
Tip
Adjustable
Exhaust
Deflecter
Bubble Level
Trigger
Rubber
Comfort
Grip
Work
Contact
Element
(WCE)
Battery Cover/
Compartment
Conversion Switch
Swivel Plug
ADC
Thumbwheel
Electronics
ON / OFF
Switch
Magazine
Stud Finder Light
Low Nail
Indicator Light
Stud Finder
Operation
Button
Pusher Latch Button
Quick Clear
Nose Cover
Electronics
Audio
Speaker
Laser
Nail Pusher
No-mar tip
Storage
Post
Nail Loading
Area
See Below