Filter
Top Products
Installing the PIXMA MG3120 on Your Wireless Network
If you are installing your printer on your network for the first time, a step-by-step walk through of the wireless setup is built in to the installation
routine of the software that shipped with your PIXMA.
*Insert the Setup CD-ROM that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions.
*If you don’t have or cannot use the Setup CD-ROM, you can still install the printer using a downloaded file. Click here for information.
Be sure to select Wireless Connection on the Connection Method Selection screen (1-2).
Installing the Drivers & Software
6
<< Previous Next >>
Continue carefully following the Printer Setup instructions (Steps 2-1 through 2-3) until the Setup Procedure Selection screen (3-1)
appears. This is shown on the next page.