Central Pneumatic Air Compressor 68740 Air Compressor User Manual


 
Page 5
For technical questions, please call 1-800-444-3353.
SKU 67501/68740
22. WARNING: The brass components of this
product contain lead, a chemical known to the
State of California to cause birth defects (or other
reproductive harm). (California Health & Safety
code § 25249.5, et seq.)
23. The warnings, precautions, and instructions
discussed in this instruction manual cannot cover
all possible conditions and situations that may
occur. It must be understood by the operator that
common sense and caution are factors which
cannot be built into this product, but must be
supplied by the operator.
SAVE THESE
INSTRUCTIONS.
Grounding
TO PREVENT ELECTRIC
SHOCK AND DEATH FROM
INCORRECT GROUNDING WIRE
CONNECTION:
Check with a qualied electrician if you
are in doubt as to whether the outlet is
properly grounded. Do not modify the
power cord plug provided with the
compressor. Never remove the grounding
prong from the plug. Do not use the
compressor if the power cord or plug is
damaged. If damaged, have it repaired by
a service facility before use. If the plug
will not t the outlet, have a proper outlet
installed by a qualied electrician.
110-120 V~ Grounded
Compressors: Compressors with
Three Prong Plugs
1. In the event of a malfunction or breakdown,
grounding provides a path of least resistance for
electric current to reduce the risk of electric shock.
This compressor is equipped with an electric cord
having an equipment-grounding conductor and a
grounding plug. The plug must be plugged into
a matching outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.
2. Do not modify the plug provided – if it will not t the
outlet, have the proper outlet installed by a qualied
electrician.
3. Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
The conductor with insulation having an outer
surface that is green with or without yellow
stripes is the equipment-grounding conductor. If
repair or replacement of the electric cord or plug
is necessary, do not connect the equipment-
grounding conductor to a live terminal.
4. Check with a qualied electrician or service
personnel if the grounding instructions are not
completely understood, or if in doubt as to whether
the compressor is properly grounded.
5. Use only 3-wire extension cords that have 3-prong
grounding plugs and 3-pole receptacles that accept
the compressor’s plug.
6. Repair or replace damaged or worn cord
immediately.
120 V~ 3-Prong Plug and Outlet
(for up to 120 V~ and up to 15.5 A)
Grounding
Pin
7. This compressor is intended for use on a circuit
that has an outlet that looks like the one illustrated
above in 120 V~ 3-Prong Plug and Outlet. The
compressor has a grounding plug that looks like the
plug illustrated above in 120 V~ 3-Prong Plug and
Outlet.
8. The outlet must be properly installed and grounded
in accordance with all codes and ordinances.
9. Do not use an adapter to connect this compressor
to a different outlet.
Symbology
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
A
Amperes
n
0
xxxx/min.
No Load Revolutions per Minute
(RPM)