Filter
Top Products
EN Legend™ 412Z QRG
3
What is
Included
· Legend™ 412Z
· Neutrik® powerCON® power
cord
· Omega bracket with mounting
hardware
· Warranty Card
· Quick Reference Guide
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Power Linking
You can link up to 9 Legend™ 412Z products at 120 VAC, 15 at 208 VAC, or
17
at 230 VAC. Never exceed this number. Power linking cords can be
purchased separately.
AC Plug
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow/Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Replacing the
Fuse
1. Disconnect this product from power.
2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap
from the housing.
3. Remove blown fuse and replace with a fuse of the same type and
rating.
4. Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The Legend™ 412Z will work with a DMX controller using a regular DMX
serial connection. A DMX Primer is available from www.chauvetpro.com.
DMX Connection
The Legend™ 412Z uses a regular DMX data connection for its DMX
personalities: 15chan, 27chan, 31chan, and 34chan. See the
User Manual to
connect and configure for DMX operation.