Filter
Top Products
4. Operating Instructions 9 1/4/2010 11:37 AM
Master/Slave Mode (Sound-Active, Auto Mode, Static Colors)
This mode allows a single unit to run a standalone program, while 1 or more other units follow the
same operation. This requires the fixtures to be linked with DMX cables. Please see the section on
Fixture Linking.
1) Turn switch to the Slave position on the slave units, and they will react the same as the Master.
Mode DIP switches
Slave 1~11 = Off
Strobe Speed
This fixture has a strobe speed adjustment which will decrease the maximum speed. Please see the
setting below for lowering the strobe rate for compatibility mode.
Mode DIP switches
Standard mode
6 Hz~18 Hz: 12 = On
Decreased Speed
2 Hz~6 Hz: 12 = Off