Filter
Top Products
Page 4SKU 41695
For technical questions, please call 1-800-444-3353.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities, contain chemicals known [to the State of California] to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals
are:
- Lead from lead-based paints
- Crystalline silica from bricks and cement or other masonry
products
- Arsenic and chromium from chemically treated lumber
(California Health & Safety Code 25249.5,
et seq.
)
Warning: The brass components of this product contain lead, a chemical known to the State
of California to cause birth defects (or other reproductive harm).
(California Health & Safety Code § 25249.5,
et seq.
)
Warning: Exposure to aluminum oxide (a dust generated from material removing processes)
can result in eye, skin and breathing irritation. Always use a NIOSH (National Institute for
Occupational Safety and Health) approved respirator and safety goggles. Avoid skin expo-
sure. Proper ventilation in the work area is required.
Additional Rotary Tool Safety Warnings.
1. Make sure accessories are rated for the speed recommended for this tool.
2. Securely clamp workpiece as the Rotary Tool spins at very high RPM rates. Never hold a
workpiece in your hands.
3. Always disconnect the DC power source before changing accessories.
4. Do not grind or sand near flammable materials.
5. After use, do not touch the bit or collet until the tool has had enough time to cool off.
6. If the bit or accessory bogs down or becomes jammed, make sure to turn off the switch
and unplug from the power source before clearing the bit or accessory.
7. Always feed the accessory or bit in the proper direction. Feed in the direction that the
cutting edge is exiting the workpiece (that is the same direction chips are thrown).
8. Always bring the tool up to speed before contacting the material.
9. Make sure there are no foreign objects, such as nails, in your workpiece.
10. Don’t use dull or damaged bits. Dull or damaged bits may break off and cause serious
injury. Replacement accessories are available at Harbor Freight Tools.
11. After changing bits or accessories, make sure the collet is securely fastened.
Unpacking
When unpacking, check to make sure the parts listed on page 6 are included. If any parts
are missing or broken, please call Harbor Freight Tools at the number on the cover of this
manual as soon as possible