Filter
Top Products
Page 3SKU 47991 For technical questions, please call 1-800-444-3353.
11. Remove adjusting keys and
wrenches. Check that keys and
adjusting wrenches are removed
from the tool or machine work surface
before plugging it in.
12. Avoid unintentional starting. Do not
carry any tool with your nger on the
trigger, whether it is plugged in or not.
13. Stay alert. Watch what you are doing,
use common sense. Do not operate
any tool when you are tired.
14. Take caution as some woods
contain preservatives such as
copper chromium arsenate (CCA)
which can be toxic. When drilling
these materials extra care should be
taken to avoid inhalation and minimize
skin contact.
15. WARNING: Some dust created by
power sanding, sawing, grinding,
drilling, and other construction
activities, contains chemicals
known [to the State of California] to
cause cancer, birth defects or other
reproductive harm. Some examples
of these chemicals are:
Lead from lead-based paints
Crystalline silica from bricks and
cement or other masonry products
Arsenic and chromium from chemically
treated lumber
Your risk from these exposures
varies, depending on how often you
do this type of work. To reduce your
exposure to these chemicals: work in
a well ventilated area, and work with
approved safety equipment, such as
those dust masks that are specially
designed to lter out microscopic
particles. (California Health & Safety
Code § 25249.5, et seq.)
16. People with pacemakers should
consult their physician(s) before
use. Electromagnetic elds in close
proximity to heart pacemaker could
cause pacemaker interference or
pacemaker failure. In addition, people
with pacemakers should:
• Avoid operating alone.
• Don’t use with power switch locked
on.
• Properly maintain and inspect to
avoid electrical shock.
• Any power cord must be properly
grounded. Ground Fault Circuit
Interrupter (GFCI) should also be
implemented – it prevents sustained
electrical shock.
17. Check for damaged parts. Before
using any tool, any part that appears
damaged should be carefully checked
to determine that it will operate
properly and perform its intended
function. Check for alignment and
binding of moving parts; any broken
parts or mounting xtures; and any
other condition that may affect proper
operation. Any part that is damaged
should be properly repaired or replaced
by a qualied technician. Do not use
the tool if the trigger does not turn On
and Off properly.
18. Guard against electric shock.
Prevent body contact with grounded
surfaces such as pipes, radiators,
ranges, and refrigerator enclosures.
19. Replacement parts and accessories.
When servicing, use only identical
replacement parts. Use of any other
parts will void the warranty. Only use
accessories intended for use with
this tool. Approved accessories are
available from Harbor Freight Tools.
20. Do not operate tool if under the
inuence of alcohol or drugs. Read
warning labels on prescriptions to
determine if your judgment or reexes
are impaired while taking drugs. If there
is any doubt, do not operate the tool.