Filter
Top Products
Page 6SKU 54878
For technical questions, please call 1-800-444-3353.
Note: What does the term “duty cycle mean?
Duty cycle is a welding equipment specification, which defines the number of minutes, within
a 10-minute period, during which a given welder can safely produce a particular welding cur-
rent. For example, this 90 amp welder with a 10% duty cycle must be rested for at least 9
minutes after 1 minute of continuous welding.
Failure to carefully observe duty cycle limitations can easily over stress a welder’s
power generation system contributing to premature welder failure. Many welders do
not have internal protection systems that prevent this sort of over stress -- leaving the
task to the owner or operator.
Operation
This Welder is used to weld sheet metal and light carbon steel.
Caution: Before welding, read and understand all safety precautions and warnings
listed on pages 2 through 5.
Cover Locking Spring (8)
Cover (31)
Handle (30)
Wire Reel (27)
Switch (7) Power On / Off
Switch (7) Current Min. / Max.
Overload Indicator Light
Wire Feed Speed Knob (9)
Torch (1) Cable
Ground Cable (33)
Power Cord (32)