Filter
Top Products
SKU 67256 For technical questions, please call 1-800-444-3353. Page 11
MAINTENANCE AND
SERVICING
Procedures not specically
explained in this manual
must be performed only by a
qualied technician.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch (44) of
the Tool to its “OFF” position
and unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
TO PREVENT SERIOUS
INJURY FROM TOOL
FAILURE:
Do not use damaged
equipment. If abnormal noise
or vibration occurs, have the
problem corrected before
further use.
BEFORE EACH USE, inspect the 1.
general condition of the Tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical
wiring, and any other condition that
may affect its safe operation.
The Sanding Sheet (504) should not
be dull or contain excessive debris
The Angled Scraper (4) and cutting
Blades (501, 503) should be clean
and sharp.
AFTER USE,2. clean external surfaces
of the tool with clean cloth.
If you notice decreased performance, 3.
have the unit serviced and Carbon
technician.
4. WARNING! If the Power Cord
(46) of this Tool is damaged,
it must be replaced only by a
qualied service technician.
PLEASE READ THE
FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR
DISTRIBUTOR HAS PROVIDED THE
OR DISTRIBUTOR MAKES ANY
REPRESENTATION OR WARRANTY OF
ANY KIND TO THE BUYER THAT HE
REPAIRS TO THE PRODUCT, OR THAT HE
PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR
BE UNDERTAKEN BY CERTIFIED AND
THERETO, OR ARISING OUT OF HIS OR
PARTS THERETO.