Filter
Top Products
Page 2 For technical questions, please call 1-800-444-3353. Item 68859
Specifications
Charger
120V~, 60Hz. 50W Input
7.2-24VDC Output
1 Hour Charge Time
Battery Type
18V, 1500mAh, NiCd
(SKU 68860, sold separately)
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMPORTANT SAFETY INFORMATION
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The warnings, precautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur.
It must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
1. Use on dry, flat, fireproof surface
only. The Charger gets hot during
use. The Charger’s heat can build
up to unsafe levels and create a
fire hazard if it does not receive adequate
ventilation, due to an electrical fault, or if it is
used in a hot environment.
2. Do not place the Charger on a flammable
surface. Do not obstruct any vents on
the Charger. Especially avoid placing
the Charger on carpets and rugs; they
are not only flammable, but they also
obstruct vents under the Charger.
3. Place the Charger on a stable, solid,
nonflammable surface (such as a stable
metal workbench or concrete floor) at
least 1 foot away from all flammable
objects, such as drapes or walls.