Filter
Top Products
Page 3For technical questions, please call 1-800-444-3353.Item 69325
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
Note: Tile Saw sold separately.
1. Pull the Tile Saw’s Table to the front of
the Frame. From under the right side of
the Table, align the hole in the rail with
the pin in the Table Lock Lever. Push
the pin into the rail, locking the Table.
2. Align the holes on the Tile Saw’s
Water Tray Frame with the
holes on the Stand.
3. Insert Short Bolts through Washers
and into holes. Tighten securely.
Stand
Water Tray
Frame
Washer
Short Bolt
Parts List and Diagram
Part Description Size Qty
1a Hex Bolt M8×55 2
2a Insert C 2
3a Bolt M8×20 2
4a Front Support Leg Asm. 1
5a Foot 2
6a Flat Washer 8 4
Part Description Size Qty
7a Locknut M8 2
8a Rear Support Leg Asm. 1
9a Flat Washer 12 2
10a Wheel 2
11a Flat Washer 10 2
12a Locknut M10 2
1a 2a
3a 2a
6a
4a
3a
5a
7a
8a 6a
1a
9a 10a 11a 12a