Chicago Electric 94009 Welding System User Manual


 
SKU 94009 Page 6For technical questions, please call 1-800-444-3353.
Maintenance
1. Keep this unit clean and dry. Unplug the unit before cleaning. Clean only the
outside of this unit with a soft, dry cloth; never clean this unit with water or harsh
cleaners.
2. This device does not contain any user replaceable parts. If it needs service,
take it to a qualified technician.
Due to the sensitive wiring and electrical circuits within this device, and the
possibility of injury, the fuses inside this unit are to be replaced only by a
qualified technician. Also, this unit must have all energy storing electronics
discharged BEFORE opening; test for voltage to verify that the unit is safe
BEFORE opening.
Operation
Warning: NEVER operate this inverter unless it is properly grounded.
1. Plug the 115 VAC device(s) you wish to power into the 3-prong AC Receptacles.
See
FRONT
above. The appliance(s) must not use more than 1,000 (total) watts
during continuous operation, otherwise it may overload the Inverter.
Caution: Some rechargeable appliances may damage the Power Inverter or the
appliance. When first using a rechargeable device, check the inverter’s tem-
perature for the first 10 minutes. If it becomes abnormally hot, do not use this
device with the Inverter.
2. Flip the Power Switch to the ON position to turn on. Do not use the appliance
until the switch illuminates.
3. Turn on appliance. If an alarm sound is heard, turn off the appliance.
Caution: It is recommended that the vehicle be started every hour to recharge
the battery. Doing this will help prevent any unexpected shutdown of the equip-
ment. This will also help ensure that there will be enough battery power to start
the vehicle. Due to the risk of carbon monoxide inhalation (see
Warning
# 22 on
page 4), do not run the vehicle’s engine within an enclosed area.
4. After use, disconnect the appliances and flip the Switch to the OFF position.
FRONT
Outlets
Switch