Filter
Top Products
Page 8 For technical questions, please call 1-800-444-3353. Item 94338
SAFETY OPERATION MAINTENANCESETUP
Specifications
Electrical Rating 120 VAC, 60 Hz, 2 A
No Load Speed 12,000 Orbits Per Minute
Dust Chute 1
1
/
4
″ OD
Sanding Pad Dimensions 3-5/8″ W x 7-3/8″ L x 1/4″ thick
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Make sure that the Trigger is in the off-position and unplug the tool from its
electrical outlet before performing any procedure in this section.
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Diagram on page 11.
Assembly
Attaching the Dust Bag (29)
1. Connect the Dust Bag to the sander by firmly pushing
it into the dust port in the rear of the sander.
2. The Dust Bag (29) will only work if the
sandpaper has holes that line up with the
8 dust collection holes in the Pad (22).
E194601