Filter
Top Products
SKU 94739 For technical questions, please call 1-800-444-3353 Page 3
8. When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”.
These extension cords are rated for outdoor use, and reduce the risk of electric shock.
Personal Safety
9. Stay alert. Watch what you are doing, and use common sense when operating a power tool.
Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A
moment of inattention while operating power tools may result in serious personal injury.
10. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing,
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving
parts.
11. Avoid accidental starting. Be sure the Power Switch is off before plugging in. Carrying power
tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on,
invites accidents.
12. Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that
is left attached to an operational part of the power tool may result in personal injury.
13. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance
enables better control of the power tool in unexpected situations.
WARNING: This product, when used for welding, plasma cutting, soldering, or similar
applications, produces chemicals known to the State of California to cause cancer and birth
defects (or other reproductive harm). (California Health & Safety Code § 25249.5, et seq.)
Tool Use and Care
14. Use clamps (not included) or other practical ways to secure and support the work piece to a stable
platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
15. Do not force the tool. Use the correct tool for your application. The correct tool will do the job
better and safer at the rate for which it is designed.
16. Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be
controlled with the Power Switch is dangerous and must be replaced.
17. Disconnect the Power Cord Plug from the power source before making any adjustments,
changing accessories, or storing the tool. Such preventive safety measures reduce the risk of
starting the tool accidentally.
18. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in
the hands of untrained users.
19. Maintain tools with care. Keep the welder clean. Properly maintained tools function better and
are easier to control. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.
20. Check for misalignment or binding of moving parts, breakage of parts, and any other condi-
tion that may affect the tool’s operation. If damaged, have the tool serviced before using.
Many accidents are caused by poorly maintained tools.