Filter
Top Products
English Page 894761
For technical questions, please call 1-800-444-3353.
Using a screwdriver (not included), unscrew the four 3 X 12 Tap Screws (1).
Remove the Lamp Cover (2), Sponge Strip (3), Rubber Ring (4) and then the Glass
covering (5).
Unscrew the Lamp Tube (6) and remove from the body of the Worklight. Replace
with a similar 25 watt fluorescent bulb set.
Put the Glass covering (5), Rubber Ring (4), Sponge Strip (3) and Lamp Cover (2)
back into place. Then place the Lamp Cover (2) back into place and tighten with
the four 3 X 12 Tap Screws (1).
INSPECTION, MAINTENANCE, AND CLEANING
WARNING! Make sure the Power Switch of the tool is in its “OFF” position,
that the tool is unplugged from its electrical outlet, and that the bulb is allowed to
cool completely before performing any inspection, maintenance, or cleaning pro-
cedures.
BEFORE EACH USE, inspect the general condition of the tool. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, dam-
aged electrical wiring, and any other condition that may affect its safe operation. If
abnormal noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
WARRANTY
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for
the period of ninety days from the date of purchase. This warranty does not apply to damage due directly or
indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, or to lack of
maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use of our product. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS
WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid.
Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection
verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase
price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our
expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of
our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
LIMITED 90 DAY
WARRANTY
3.
4.
5.
6.
1.
2.