Chicago Electric 97593 Sander User Manual


  Open as PDF
of 16
 
SKU 97593 For technical questions, please call 1-800-444-3353. Page 12
Troubleshooting
Problem Possible Causes Likely Solutions
Tool will not start No power at outlet.1.
Cord not connected.2.
Carbon Brushes are worn.3.
Check power at outlet.1.
Check that cord is plugged in.2.
Replace Carbon Brushes.3.
Poor sanding
quality
Sanding belt worn or clogged.1.
Sanding against wood grain.2.
3.
against the wood grain.
Replace sanding belt.1.
Sand along the wood grain.2.
3.
Follow all safety precautions whenever diagnosing or servicing the
tool. Disconnect power supply before service.
PLEASE READ THE FOLLOWING CAREFULLY










 previous next