Filter
Top Products
4-9
Cisco 12010, Cisco 12410, and Cisco 12810 Router Installation and Configuration Guide
OL-11496-01
Chapter 4 System Startup and Basic System Configuration
Powering On the Router and Observing the Boot Process
ROMI
GET
The ROM image is being loaded into line card memory. RP Cisco IOS
software
FABL
WAIT
The line card is waiting for the fabric downloader to load.
3
RP Cisco IOS
software
FABL
DNLD
The fabric downloader is being loaded into line card memory. RP Cisco IOS
software
FABL
STRT
The fabric downloader is being launched. RP Cisco IOS
software
FABL
RUN
The fabric downloader is launched and running. RP Cisco IOS
software
IOS
DNLD
Cisco IOS software is being downloaded into line card memory. RP Cisco IOS
software
IOS
STRT
Cisco IOS software is being launched. RP Cisco IOS
software
IOS
UP
Cisco IOS software is running. RP Cisco IOS
software
IOS
RUN
The line card is enabled and ready for use. RP Cisco IOS
software
1. Some LED sequences may occur too quickly to view. Sequence are shown in this tabular form as a baseline to represent line
card functionality at startup.
2. The version of MBus microcode running on your system might be different.
3. The fabric downloader loads the Cisco IOS software image onto the line card.
Table 4-2 Line Card Alphanumeric LED Display Sequence Examples (continued)
LED Display
1
Meaning Source